It’s common for PlayStation 3 consoles to stop working and when you try to power them on, they either blink red or yellow and don’t boot. You’d still get a “CRT look”, but with about the same lag as your average flat-screen. Please note that while RGB Monitors are always zero-lag, some consumer-grade “HD CRT’s” actually add about two frames of lag due to their internal processing. Most HDMI to HD-SDi converts are completely lag-free, as they only convert the signal between formats and don’t use a framebuffer to change anything. If you have an RGB monitor that supports 720p and HD SDi, you can use an HDMI to HD SDi converter to play games in the highest quality on your monitor. Some CRT monitors can support 480p, 720p and 1080i as well, so you can take advantage of those. Please note that most CRT’s and RGB monitors only support 15KHz resolutions, meaning the only signal you’d be able to output from a PS3 in that scenario is 480i. The easiest way to play PS3 on a CRT is via component video out. While it might be strange to think about using a console that shipped with HDMI on a CRT, many gamers and enthusiasts enjoy both the look and the zero-lag display a CRT has to offer. This was generally regarded as terrible and should be avoided.Īll models that were released after that removed PS2 support altogether for costs reasons and aren’t compatible with PS2 games without a modification.ĬECHA01 – Hardware-based backward compatibility, good choice for PS2 disc support.ĬECHB01 – I think all “B01” consoles were also 100% hardware compatible, but I’ve never gotten confirmation.ĬECHE01 – Partially software-based backward compatibility, not recommended for PS2 games. Some PS3 models replaced PS2 hardware support with software emulation.

There’s even some smoothing and filtering options that some people might enjoy. I’m not sure why this happens, but it was noted on multiple games.Īs a result, the PS3 is a decent way to play PS1 games on a flat-screen TV, but a terrible way to try and play PS1 games on a CRT, unless you’re specifically looking for 480p support.Įarly models of the PS3 had PS2 hardware built in, making it a decent way to play PS2 games.

Generally speaking, PSN downloads of PS1 games looked much sharper than playing original PS1 discs. Also, since the PS3 can’t output 240p, all PlayStation 1 games will either be outputted at 480i, or scaled to 480p and above. The RGB signal will only output 480i and no other resolution! As a note, 240p isn’t supported from any output.Īll models of the PS3 are backward compatible with PS1 discs, however I’ve found the video quality to be noticeably softer than when using PS1 or PS2 consoles. The PlayStation 3 can output 480i, 480p, 720p, 1080i and 1080p from it’s component video and HDMI outputs. Sony Playstation RGB SCART Cable – (US Seller, offers composite video pigtail for light gun games) Sony Playstation RGB SCART Cable – (UK Seller, Composite Video port for light guns)

Force ps2 240p 480p